Is There A PUWER Certificate? What PUWER Records Actually Show

No. The Provision and Use of Work Equipment Regulations 1998 (PUWER) do not issue or require a certificate for a machine, and there is no PUWER expiry date to renew. What the regulations ask for is evidence: the result of each inspection required under regulation 6, recorded and kept until the next one is recorded, and, where a machine has a maintenance log, a log that is kept up to date. Courses sold as PUWER certificates are training for people, which is a separate duty under regulation 9.

If you want your machinery assessed against PUWER, send the equipment list and site address to info@gsbinspections.co.uk and we aim to come back with a quote within 48 hours.

Why There Is No PUWER Certificate For Work Equipment

PUWER places duties on the employer rather than setting a test the machine passes. Regulation 4 requires equipment to be suitable, regulation 5 to be maintained, regulation 6 to be inspected where its safety depends on it, and regulations 11 onwards deal with guarding, controls, isolation and the rest. None of those produces a dated certificate.

The inspection regimes that run on fixed statutory dates sit elsewhere. Lifting equipment is examined under LOLER, and regulation 6(5) of PUWER leaves equipment for lifting loads out of its own inspection duty for that reason. Certain power presses also have their own thorough examination rules within PUWER.

What PUWER Regulation 6 Says About Inspection Records

Regulation 6 requires inspection in three situations: after installation and before first use, or after assembly at a new site or location, where safety depends on the installation conditions; at suitable intervals, where the equipment is exposed to conditions causing deterioration liable to result in dangerous situations; and each time exceptional circumstances liable to jeopardise its safety have occurred.

Regulation 6(3) then requires the result of each of those inspections to be recorded and kept until the next inspection is recorded. HSE’s guidance on inspecting work equipment adds that the record does not have to be on paper. A computer record is acceptable if it is held securely and can be produced when an enforcing authority asks for it, and the simplest pre-use checks do not normally need recording at all.

Inspection Evidence When Work Equipment Changes Hands

Regulation 6(4) covers equipment that leaves your undertaking, and equipment you obtain from someone else, such as a hire company. It must be accompanied by physical evidence that the last required inspection has been carried out. HSE gives an inspection report as an example or, for smaller items, a tag, colour code or label. The nearest thing PUWER has to a certificate is that record of the last inspection travelling with the machine.

A Maintenance Log Is Not A PUWER Inspection Record

Regulation 5 and regulation 6 are separate duties. Regulation 5 requires equipment to be maintained in an efficient state, in efficient working order and in good repair, and where a machine has a maintenance log, that log must be kept up to date. A service history of lubrication, oil changes and repairs shows the machine is being maintained. It does not show that anyone has checked the guards, interlocks, stops and isolation to confirm the machine is still safe to use, which is what regulation 6 inspection is for. Treating one as the other is a recurring enforcement finding.

Does CE Or UKCA Marking Prove PUWER Compliance?

No. Regulation 10 requires an employer to ensure that work equipment conforms at all times with the essential requirements of the product safety legislation it was supplied under, for equipment first provided for use after 31 December 1992. The marking records the manufacturer’s position at the point of supply. It says nothing about how the machine has been installed, guarded, modified or maintained since.

A substantial modification can invalidate the original declaration of conformity, at which point the machine has to be treated as new, assessed against the essential health and safety requirements and re-marked. Undocumented modification is the most frequent high-risk finding in our PUWER assessments.

How Often PUWER Inspections Are Needed

PUWER sets no fixed interval for general work equipment. HSE says the frequency should be set through risk assessment, taking account of the manufacturer’s recommendations, so a press brake on a busy line and a pillar drill in a maintenance shop can need very different intervals. Because the regulation leaves the interval open, a competent person has to work one out from the equipment, its use and its environment.

Our assessments recommend inspection periods as part of the report, for example 12-monthly for safety devices and for the machinery itself, with pre-use and monthly visual checks in between. Those are recommendations drawn from the assessment, not statutory dates.

What A PUWER Risk Assessment Report Gives You Instead

A GSB PUWER assessment produces one report per machine. Each covers the equipment details, an assessment matrix against regulations 4 to 30 with a written verdict and a separate action-required column for every criterion, a scored risk assessment showing the current rating and the residual rating once the recommended controls are in place, recommended inspection periods, captioned photographs of the findings and a statement signed by the assessment engineer.

The report is a preliminary risk assessment. It gives you the technical evidence and a prioritised action plan, which you then use to form your own final risk assessment, as the Management of Health and Safety at Work Regulations 1999 expect. A provider that hands over a document described as your completed PUWER compliance is describing something the law leaves with the employer. There is more on how the work runs on our PUWER risk assessments page.

PUWER Certificate And Records Questions

Is a PUWER certificate a legal requirement?

No. PUWER requires inspection results to be recorded and kept until the next inspection is recorded. It does not require a certificate.

Can PUWER inspection records be kept electronically?

Yes. HSE says records do not have to be in writing, as long as they are held securely and made available to an enforcing authority on request.

How long do we keep a PUWER inspection record?

Until the result of the next inspection under regulation 6 has been recorded.

Does a hired machine need to come with an inspection record?

Yes, where regulation 6 inspection applies. Equipment obtained from another person must be accompanied by physical evidence of its last inspection, such as a report or a tag.

Does a forklift’s LOLER report cover PUWER?

It covers the lifting side, which PUWER regulation 6 leaves to LOLER. The truck is still work equipment, so the rest of PUWER applies to it as well.

Is a PUWER training certificate the same thing?

No. A training certificate relates to a person and the regulation 9 training duty. It says nothing about whether a particular machine is safe to use.

Arrange A PUWER Risk Assessment

We assess machinery and work equipment against PUWER and report per machine, from a single press brake to the plant across several sites. We sell assessments and inspections only: no guarding, interlocks, parts, retrofits or maintenance contracts, so nothing in a report is there to sell you a fix. With five engineers, a single machine and a multi-site programme are equally welcome.

Send the machine list, with makes and models where you have them, and the site address to info@gsbinspections.co.uk. We aim to reply with a quote within 48 hours. To talk it through first, call 01782 855481 to speak to one of the two directors, both senior engineers, then send the list in writing so the job is on record from enquiry to report.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm