What Markings Does LOLER Require On Lifting Equipment?

Regulation 7 of the Lifting Operations and Lifting Equipment Regulations 1998 is short, but it decides what has to be written on every crane, hoist, platform and sling in use at work. It covers safe working loads, equipment whose capacity changes with its set-up, the extra markings accessories need, and equipment that does or does not lift people. This guide sets out each duty, how marking connects to the report of thorough examination, and what an examiner looks for.

If you would like your lifting equipment and gear examined, email a list and the site address to info@gsbinspections.co.uk and we aim to send a quote within 48 hours.

What LOLER Regulation 7 Requires On Lifting Equipment Marking

The duty sits with the employer and has five parts. The employer must make sure that:

  1. machinery and accessories for lifting loads are clearly marked to indicate their safe working loads;
  2. where the safe working load of machinery depends on its configuration, either the machinery is marked with the safe working load for each configuration, or information that clearly shows the load for each configuration is kept with it;
  3. accessories for lifting are also marked so that the characteristics necessary for their safe use can be identified;
  4. lifting equipment designed for lifting persons is appropriately and clearly marked to that effect;
  5. lifting equipment not designed for lifting persons, but which might be used that way in error, is appropriately and clearly marked to show it is not designed for lifting persons.

Safe Working Load Marking Under LOLER

HSE describes the safe working load (SWL) as the maximum load the equipment can safely lift, and its LOLER overview says all lifting equipment, accessories included, must be clearly marked with it. A crane, a chain block, a lifting beam and a shackle each need their own SWL marking; the hoist rating does not cover the sling hanging beneath it.

SWL For Each Configuration: Cranes, Booms And Multi-Mode Machines

Some machinery can lift different loads depending on how it is set up, such as boom length, radius or outrigger position. Regulation 7 gives two options here: mark the SWL for every configuration, or keep information showing the SWL for each configuration with the machinery. HSE gives the rated capacity indicator on a crane as an example of that information being kept with the machine.

Extra Markings LOLER Requires On Lifting Accessories

Accessories carry a second duty on top of the SWL. They must be marked so that the characteristics necessary for their safe use can be identified, which HSE puts as any characteristics that might affect safe use. Which characteristics matter depends on the item, so the manufacturer’s information is the starting point for deciding what each sling, shackle or clamp should show.

LOLER Markings For Equipment That Lifts People

A MEWP, a passenger hoist or a man-riding cage is designed for lifting persons and must be clearly marked as such. HSE adds that it should show the number of people that can be lifted as well as the SWL. Equipment that is not designed for people but might be used to lift them in error, such as a materials hoist, must be clearly marked that it is not designed for lifting people.

How Marking Links Lifting Equipment To Its LOLER Report

Schedule 1 to LOLER requires each report of thorough examination to include information sufficient to identify the equipment, along with its safe working load. On a register of many similar slings or shackles, an identity mark on each item is the practical way to meet that, because it lets the examiner, and anyone checking later, match the item in the store to its line in the report.

Regulation 9(4) adds that lifting equipment must not leave the employer’s undertaking, or be used after arriving from another undertaking, unless it is accompanied by physical evidence that the last required thorough examination has been carried out, which is one more reason items need to be traceable.

What A LOLER Examiner Checks On SWL And Identity Marks

During a thorough examination the competent person checks that the markings are present, legible and consistent with the equipment and its records. Missing or unreadable SWL markings, a tag that does not match the register, or an accessory with no way of identifying it are recorded on the report. An item that cannot be identified cannot be matched to an examination record, so in our judgement it should stay out of use until it has been examined and marked.

LOLER Marking Questions

Does every sling and shackle need its own SWL marking?

Yes. Regulation 7 applies to accessories for lifting as well as machinery, so each one is marked with its safe working load.

Our crane’s capacity changes with radius. Does every load need marking on it?

No. Regulation 7 allows the information showing the SWL for each configuration to be kept with the machinery instead.

Do access platforms need to show how many people they can carry?

HSE’s guidance says equipment for lifting people should be marked with the number of people that can be lifted in addition to the SWL.

Is colour coding of lifting gear required by LOLER?

No. Regulation 7 requires SWL and safe-use markings. Coloured tags showing examination periods are an optional practice some employers use.

LOLER Thorough Examinations And Marking Checks From GSB

Our engineers carry out LOLER thorough examinations of cranes, hoists, forklifts, access platforms and lifting accessories, and our reports record what we find on marking and identification. We examine and report only, and sell, hire and repair no equipment.

Send your equipment list and site address to info@gsbinspections.co.uk and we aim to quote within 48 hours. To talk it through first, ring 01782 855481 and speak to one of GSB’s two directors, who own the business and are both senior engineers. SAFed, the Safety Assessment Federation, counts GSB among its associate members.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm