Hiring, Lending Or Borrowing Lifting Equipment: What Does LOLER Require?

Plenty of lifting equipment is used by a business other than its owner. Platforms and cranes are hired in, slings go out to contractors, and gear moves between companies on shared sites. LOLER has specific rules for these moves: equipment has to travel with evidence that it has been examined, the hire company receives a copy of the report, and the enforcing authority is different when a defect is found on hired or leased equipment. This guide sets out each rule.

If you need hired, lent or owned lifting equipment examined, email the list and site address to info@gsbinspections.co.uk and we aim to come back with a quote within 48 hours.

LOLER Regulation 9(4): Evidence Of Examination When Lifting Equipment Moves

Regulation 9(4) of the Lifting Operations and Lifting Equipment Regulations 1998 requires every employer to ensure that no lifting equipment leaves its undertaking, and that no lifting equipment obtained from another person’s undertaking is used in its own, unless it is accompanied by physical evidence that the last thorough examination required under regulation 9 has been carried out.

The duty falls on both sides: the business sending the equipment out and the business receiving it.

What Counts As Physical Evidence Of A LOLER Examination

The regulation does not prescribe a format. In practice a copy of the latest report of thorough examination is the clearest evidence, because it identifies the equipment, its safe working load and the latest date for the next examination. For small accessories such as slings and shackles, an identity mark that matches a current report entry does the same job. In our judgement, a hire delivery without either should not be put to work until the evidence is produced.

Who Receives The LOLER Report On Hired Or Leased Equipment

Under regulation 10, the person carrying out a thorough examination must notify the employer forthwith of any defect that is or could become a danger, and must make a written report to the employer and to any person from whom the lifting equipment has been hired or leased. A hire company therefore receives the findings on its own equipment, even when the examination was arranged by the customer.

Dangerous Defects On Hired Lifting Equipment And HSE

Where a defect involves an existing or imminent risk of serious personal injury, regulation 10 also requires a copy of the report to go to the relevant enforcing authority. For lifting equipment that has been hired or leased, that authority is HSE. For equipment the employer owns, it is the authority that enforces at the premises, which can be HSE or the local council depending on the activity there.

Equipment with a defect that is already a danger must not be used until the defect is put right, whoever owns it.

Examination Intervals Still Apply To Hired And Borrowed Lifting Equipment

The intervals in regulation 9 follow the equipment, not the owner. A platform lifting people or an accessory for lifting needs a thorough examination at least every six months, and other lifting equipment at least every twelve, unless a competent person’s examination scheme sets other intervals. On a long hire, an examination may fall due while the equipment is on your site, so agree in advance who arranges it.

Keeping LOLER Records For Equipment From Other Businesses

Regulation 11 requires the information in reports to be kept available for inspection: periodic reports until the next report is made or for two years, whichever is later. Keeping a copy of the report that arrived with each hired or borrowed item, and of any report made while it was with you, gives you the evidence if an inspector, insurer or client asks what was examined and when.

Hired Lifting Equipment Questions

Does a hired MEWP need to arrive with its examination report?

It must be accompanied by physical evidence that its last thorough examination has been carried out. A copy of the current report is the usual way to show that.

Can we lend our slings to a contractor?

Yes, but they must leave with physical evidence that their last thorough examination has been carried out.

Who gets the report if we arrange an examination of hired equipment?

You, as the employer, and the company the equipment was hired or leased from.

Which enforcing authority is told about a serious defect on hired equipment?

HSE, where there is an existing or imminent risk of serious personal injury.

Independent LOLER Examinations Of Owned And Hired Lifting Equipment From GSB

We carry out LOLER thorough examinations of cranes, hoists, forklifts, access platforms and lifting accessories, whether you own them or they are on hire. With no fleet of our own, we have no hire or repair interest in what we find.

Email the equipment and site address to info@gsbinspections.co.uk and we aim to send a price within 48 hours. To talk first, phone 01782 855481 and you will reach one of GSB’s two directors, who own the business and are both senior engineers. GSB’s associate membership of the Safety Assessment Federation (SAFed) means we work to its code of practice for inspection bodies.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm