What Are Exceptional Circumstances Under LOLER?

LOLER’s fixed intervals are maximums, not the only times lifting equipment must be examined. Regulation 9 also requires a thorough examination each time exceptional circumstances liable to jeopardise the safety of the equipment have occurred. The regulations do not list those circumstances, so deciding when one has happened is a judgement for the employer, best made with a competent person. This guide covers what the rule says, the kinds of event that should prompt the question, and what to do next.

If something has happened to a crane, platform, forklift or set of lifting gear and you want it examined, send the details and site address to info@gsbinspections.co.uk and we aim to come back with a quote within 48 hours.

What LOLER Regulation 9 Says About Exceptional Circumstances

Regulation 9(3) of the Lifting Operations and Lifting Equipment Regulations 1998 applies to lifting equipment exposed to conditions causing deterioration that is liable to result in dangerous situations. It requires thorough examinations at least every six months for equipment lifting people and for accessories, at least every twelve months for other lifting equipment, or in line with an examination scheme, and in addition each time exceptional circumstances liable to jeopardise the equipment’s safety have occurred.

The extra examination applies whichever route you follow. An examination scheme does not remove it, and nor does a recent periodic examination.

Events That Can Count As Exceptional Circumstances Under LOLER

Because the regulations give no list, the test is whether the event was liable to affect the equipment’s safety. In our judgement, events like these should prompt the question:

  • an overload, or a shock load such as a dropped or snatched load;
  • a collision or impact, for example a forklift mast striking racking or a crane hook striking structure;
  • a mobile elevating work platform overturning, being struck, or caught by ground giving way;
  • visible damage to a structure, boom, rope, chain, hook or sling;
  • exposure to fire, flood or severe weather;
  • a long period out of use in poor conditions before being brought back into service.

None of these automatically means the equipment is unsafe. The point of the examination is to find out.

What To Do After An Incident With Lifting Equipment

  1. Take it out of use if there is any doubt about its safety, and make sure it cannot be used by mistake.
  2. Record what happened: the date, the load, the damage seen and who was involved, so the examiner has the facts.
  3. Arrange a thorough examination by a competent person before the equipment goes back into service.
  4. Act on the report. Under regulation 10 the employer is notified forthwith of any defect that is or could become a danger, equipment with a dangerous defect is not used until it is rectified, and a copy goes to the enforcing authority where there is an existing or imminent risk of serious personal injury.

Exceptional Circumstances And LOLER Examination Schemes

Where equipment is examined under a scheme rather than fixed intervals, incidents matter twice. HSE’s leaflet on thorough examination says a scheme should be reviewed regularly, at each thorough examination and after any event that may alter the risks, and that the duty holder must tell the competent person about incidents that may affect them. An incident can therefore change the scheme’s intervals as well as trigger an examination.

LOLER Records For Exceptional-Circumstance Examinations

An examination after exceptional circumstances is one of the examinations under regulation 9(3), so regulation 11 treats its report the same way as a periodic one: it is kept until the next report is made or for two years, whichever is later. Keeping your own note of the incident alongside it gives a fuller history for the next examiner, insurer or inspector.

LOLER Exceptional Circumstances Questions

Does LOLER define exceptional circumstances?

No. Regulation 9 refers to exceptional circumstances liable to jeopardise the safety of the lifting equipment but gives no list.

Who decides whether an examination is needed?

The employer is responsible for the decision. A competent person can advise on whether an event is liable to have affected safety.

Can the equipment be used while waiting for the examination?

If its safety may have been affected, it is safest kept out of use until examined. Once examined, a defect that is a danger stops use until it is rectified.

How long is an exceptional-circumstance report kept?

Until the next report is made or for two years, whichever is later.

LOLER Thorough Examinations From GSB, Including After An Incident

We carry out LOLER thorough examinations of cranes, hoists, forklifts, access platforms and lifting accessories, on the normal cycle and after incidents. Examinations are planned visits and we do not run a 24-hour callout, so tell us what has happened and we will give you the earliest date we can offer. We examine and report only, with no equipment to sell, hire or repair.

Email the equipment, what happened and the site address to info@gsbinspections.co.uk and we aim to quote within 48 hours. For advice first, phone 01782 855481 to speak to one of GSB’s two directors, who own the business and are both senior engineers. GSB holds associate membership of the Safety Assessment Federation (SAFed).

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm