Does A Forklift Need A LOLER Thorough Examination?

Yes. A forklift truck lifts loads, so the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) require it to be thoroughly examined by a competent person, and HSE’s guidance on lift trucks adds that the examination also covers safety-related parts such as the brakes, steering and tyres under the Provision and Use of Work Equipment Regulations 1998 (PUWER). This guide covers how often the examination is due, how it differs from a service, what the report tells you and what changes when a truck is hired.

Got a truck coming due? Send the make, model and capacity of each one with your postcode to info@gsbinspections.co.uk, and our aim is to price the examinations within 48 hours.

Forklift Thorough Examination Under LOLER And PUWER

HSE’s lift truck guidance puts it plainly: thorough examination of industrial lift trucks is required under LOLER, which covers the lifting equipment, and under PUWER, which deals with the other safety-related items. On a counterbalance or reach truck, the LOLER side is the mast, lift chains, carriage, forks and the hydraulics that raise and tilt the load. The PUWER side takes in the parts that keep the truck safe as a machine: brakes, steering, tyres, wheels and the like.

One visit can cover both, and a single report can record the findings for each truck.

How Often A Forklift Needs A LOLER Thorough Examination

Regulation 9 of LOLER sets the intervals for equipment exposed to conditions that cause deterioration liable to result in danger, which is the normal state of a working forklift. A truck lifting only loads needs a thorough examination at least every 12 months. Lifting accessories used with it, such as slings and shackles on the forks, need one at least every six months. A competent person can instead draw up an examination scheme with intervals based on how the truck is used.

LOLER also requires a further thorough examination each time something liable to jeopardise the truck’s safety happens, such as an overturn or a heavy impact. HSE’s guidance on lifting people adds that where people are lifted, whether or not the equipment was designed for it, it must be thoroughly examined at six-monthly intervals or in line with an examination scheme. HSE also says equipment not designed for lifting people should only be used that way in exceptional circumstances, such as rescue.

Forklift Servicing Is Not A Thorough Examination

A service keeps the truck running and is planned by the maintainer. A thorough examination is a systematic assessment by a competent person of whether the truck is safe to keep using, ending in a written report. HSE’s lift truck page makes the point directly: inspections carried out as part of preventive maintenance, or a scheduled service, do not count as a thorough examination.

Daily pre-use checks by the operator are separate again. They catch obvious faults at the start of a shift, but they do not replace either the service or the statutory examination.

What A Forklift Thorough Examination Report Tells You

The report follows Schedule 1 to LOLER. It identifies the truck, states its safe working load (or the load for the configuration it was examined in), gives the date of the last thorough examination and the latest date for the next one, and lists any defect that is or could become a danger, with the repair needed and the date by which it must be done.

Under regulation 10, the examiner notifies the employer forthwith of any such defect. A truck with a defect that is already dangerous must not be used until it is put right, and one with a dated defect must not be used after that date unless the repair has been made.

Hired And Leased Forklifts: Evidence And Reports

Regulation 9(4) applies when a truck moves between businesses: it must not leave your undertaking, or be used in yours if it came from someone else, unless it is accompanied by physical evidence that its last thorough examination was carried out. In practice that means the current report, or a copy of it, travelling with the truck.

When a hired or leased truck is examined, regulation 10 sends the report to the employer and to the company it was hired or leased from. If there is an existing or imminent risk of serious personal injury, a copy goes to HSE as the enforcing authority for hired or leased equipment.

Keeping Forklift Examination Records

Regulation 11 requires the information in each periodic report to be kept available until the next report is made or for two years, whichever is later. Keeping the reports for each truck together, by serial number, makes it simple to show an inspector, insurer or customer when every truck was last examined.

Who Should Carry Out A Forklift Thorough Examination

LOLER calls for a competent person, and HSE’s guidance on thorough examination adds that the person should be sufficiently independent and impartial to make the examination without fear or favour, and should not be the same person who carries out routine maintenance on the equipment, because they would then be assessing their own work.

Many forklifts are serviced, hired out and examined by the same dealer. That is not unlawful in itself, but it is worth weighing when the examiner also stands to quote for the repairs the report identifies.

Forklift Thorough Examination Questions

Is a forklift service the same as a thorough examination?

No. HSE states that a scheduled service, or the inspections in a preventive maintenance scheme, is not a thorough examination.

How often does a forklift need a thorough examination?

At least every 12 months for a truck lifting only loads, unless a competent person’s examination scheme sets other intervals, and again after exceptional circumstances liable to jeopardise its safety.

Does the thorough examination cover the brakes and steering?

HSE’s lift truck guidance says the thorough examination is required under LOLER for the lifting equipment and under PUWER for other safety-related items such as brakes, steering and tyres.

Who receives the report on a hired forklift?

The employer using the truck and the company it was hired or leased from, under LOLER regulation 10.

Independent Forklift Truck Inspections From GSB

We carry out forklift truck inspections and wider LOLER thorough examinations as an examination-only business, with no trucks to sell, hire or repair.

A list of trucks and capacities plus the site address, sent to info@gsbinspections.co.uk, is all we need; we aim to reply with a price inside 48 hours. Questions about a report or an interval can go to 01782 855481, answered by GSB’s two directors, who own the business and are both senior engineers. GSB is a SAFed associate member and examines to the Safety Assessment Federation’s code of practice for inspection bodies.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm