What Does A MEWP Thorough Examination Involve?

A MEWP thorough examination is the statutory check, under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), that a mobile elevating work platform is safe to keep lifting people. It is carried out by a competent person at least every six months and ends in a written report of thorough examination. This guide explains what the examination covers, how it differs from pre-use checks and servicing, what the report should tell you, and how hired platforms fit in.

If your platforms are due, send a list of the machines and the site address to info@gsbinspections.co.uk and we aim to come back with a quote within 48 hours.

Why A MEWP Needs A Six-Monthly Thorough Examination

Regulation 9 of LOLER requires lifting equipment for lifting persons to be thoroughly examined at least every six months, against 12 months for equipment that lifts only goods. A written scheme of examination drawn up by a competent person can set other intervals instead.

HSE explains why people-lifting equipment is treated more strictly. Operators of mobile elevating work platforms may collide with overhead structures, and mobile access equipment may be at higher risk of overturning, potentially resulting in serious or fatal injuries.

When Else A MEWP Thorough Examination Is Needed

As well as the six-monthly cycle, regulation 9 requires a thorough examination:

  • Before the platform is put into service for the first time, unless it comes with the evidence the regulations allow for new equipment
  • After exceptional circumstances liable to jeopardise its safety, such as an overturn, a collision, damage in transit or a long period out of use

If a platform has been involved in an incident, treat it as needing examination before it lifts anyone again.

What A MEWP Thorough Examination Covers

The competent person decides the scope for each machine, but a MEWP examination typically works through:

  • Chassis and structure: frame, welds, pins and bushes, the scissor pack or boom sections, slew ring and turntable
  • Hydraulics: cylinders, hoses, fittings and signs of leakage or drift
  • The platform: floor, guardrails, gate, anchor points and the platform’s rated load marking
  • Controls: platform and ground controls, the emergency stop and the emergency lowering or descent system
  • Safety devices: tilt alarms, overload sensing, interlocks, outrigger or stabiliser monitoring where fitted
  • Running gear: wheels, tyres, tracks and brakes

The platform is taken through its working range so that faults that only show at height or full outreach are found.

Pre-Use Checks And Servicing Are Separate From The MEWP Examination

HSE notes that pre-use checks and inspections may be needed as well as the thorough examination. These are done by trained operators before each use.

Servicing is maintenance to the manufacturer’s schedule. It keeps the machine working but does not produce a report of thorough examination. HSE’s guidance on thorough examinations says the competent person should not be the same person who carries out routine maintenance on the equipment, and should be sufficiently independent and impartial.

What The MEWP Report Of Thorough Examination Should Tell You

Each platform should have its own report, identifying the machine, the date of examination, its safe working load, any defects found and how urgently they need action, and the date of the next examination.

Under LOLER regulation 10, the person carrying out the examination must notify the employer forthwith of any defect. Where a defect involves an existing or imminent risk of serious personal injury, a copy of the report must also be sent to the relevant enforcing authority as soon as practicable.

Regulation 11 sets how long reports are kept: for periodic examinations, until the next report is made or for two years, whichever is later.

Hired MEWPs And The Thorough Examination

A hired platform should arrive with a current report of thorough examination. Before it is used, check the report matches the machine and that the next due date falls after the end of the hire. On a long hire, the six-monthly date may fall while the platform is with you, so agree in advance who arranges the examination.

Choosing Who Examines Your MEWPs

Many platforms are examined by the firm that hires them out or services them. That can work, but the same firm will often quote for any repair the report calls for. Ask any provider, ours included, who will carry out the examination and on what basis they are competent, whether they hold professional indemnity and public liability insurance, and what the price includes, in writing.

MEWP Thorough Examination Questions

Is a scissor lift covered by the six-monthly rule?

Yes. Scissor lifts, boom lifts, vehicle-mounted platforms and mast lifts all lift people, so LOLER regulation 9 requires a thorough examination at least every six months unless a written scheme sets other intervals.

Can a MEWP be used if its examination date has passed?

It should not be used to lift people until it has been thoroughly examined and a current report is in place.

Does a service count as the six-monthly examination?

No. Servicing is maintenance. The thorough examination is a separate statutory check by a competent person, recorded in a report of thorough examination.

Who is told if a MEWP has a dangerous defect?

The employer, forthwith. Where the defect involves an existing or imminent risk of serious personal injury, LOLER regulation 10 also requires a copy of the report to go to the enforcing authority.

Book A MEWP Thorough Examination With GSB

We carry out LOLER thorough examinations of scissor lifts, boom lifts and vehicle-mounted platforms, with a written report for each machine. We do not hire, sell or repair platforms, so the report carries no sales interest. With five engineers we take on single machines and multi-site fleets, and the visit can include forklifts, cranes and lifting accessories on the same site.

Email the platforms, their makes if known and the site address to info@gsbinspections.co.uk, and we aim to send a quote within 48 hours. To talk it through first, call 01782 855481; the call goes to one of the two directors, both senior engineers. GSB is an associate member of SAFed, the Safety Assessment Federation.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm