Lifting People At Work: What LOLER Requires

Lifting a person is treated more strictly than lifting a load. LOLER regulation 5 adds design and safety duties for the carrier, the thorough examination interval drops to six months, and HSE expects equipment not built for people to be used that way only in exceptional circumstances. This guide covers what applies to MEWPs, personnel hoists, man-riding equipment and anything else that raises people at work.

If you run access platforms or other people-lifting equipment, send the list and site address to info@gsbinspections.co.uk and our aim is a price for the thorough examinations within 48 hours.

Why LOLER Treats Lifting People Differently

HSE’s guidance on lifting people at work explains that people are at greater risk when lifted by machinery: operators of mobile elevating work platforms may collide with overhead structures, and mobile access equipment may be at higher risk of overturning. The higher risk calls for higher standards in design and manufacture, in use and maintenance, and in inspection and thorough examination.

LOLER Regulation 5: The Extra Duties For Lifting Persons

Regulation 5 of the Lifting Operations and Lifting Equipment Regulations 1998 requires that lifting equipment for lifting persons is such as to prevent, so far as reasonably practicable, a person using it being crushed, trapped or struck or falling from the carrier. It must have suitable devices to prevent the risk of the carrier falling, and a person trapped in a carrier must not be exposed to danger and must be able to be freed.

Where the risk of the carrier falling cannot be prevented for reasons inherent in the site and height differences, the carrier needs an enhanced safety coefficient suspension rope or chain, and that rope or chain must be inspected by a competent person every working day.

Six-Monthly Thorough Examination For People-Lifting Equipment

Regulation 9 sets at least six-monthly thorough examination for lifting equipment for lifting persons, unless an examination scheme drawn up by a competent person sets other intervals. HSE’s guidance goes further: where people are being lifted, whether or not the equipment is designed to lift them, it must be thoroughly examined at six-monthly intervals or in accordance with the examination scheme. Pre-use checks and inspections may also be needed.

New Equipment And The Declaration Of Conformity

Almost all lifting equipment used at work falls under the Supply of Machinery (Safety) Regulations 2008, which require it to be safe when first placed on the market or put into service. HSE notes that the manufacturer’s declaration of conformity may therefore substitute for the initial thorough examination before first use, provided the equipment does not depend on assembly or installation conditions after manufacture.

LOLER’s own wording is that unused equipment needs no examination before first use where the employer received the declaration of conformity no more than 12 months before it was put into service. Equipment that depends on installation, such as some hoists, still needs examining once installed.

Using Equipment Not Designed To Lift People

HSE says equipment not specifically designed for lifting people should only be used for it in exceptional circumstances, for example rescue, and then with additional precautions such as base machines fitted with extra safety measures like check valves and a locked tilt function. HSE publishes separate guidance on non-integrated work platforms fitted to the forks of lift trucks.

Regulation 7 supports this with marking: equipment designed for lifting persons must be clearly marked as such, and equipment that is not, but might be used that way in error, must be marked as not designed for lifting persons.

Planning, Training And Supervision When Lifting People

HSE expects the correct type of equipment to be chosen for the task and the activity planned through risk assessment, taking account of regulation 5 and the Approved Code of Practice. Because some users are less familiar with the risks, training and adequate supervision in operating the equipment are very important. HSE’s MEWP guidance also asks for a rescue plan that is practised, so someone on the ground knows how to bring the platform down.

Lifting People At Work: Questions

How often must equipment that lifts people be thoroughly examined?

HSE says at six-monthly intervals, or in accordance with an examination scheme, whether or not the equipment was designed to lift people.

Can we lift someone in a cage on a forklift?

HSE says equipment not specifically designed for lifting people should only be used for it in exceptional circumstances, such as rescue, with additional precautions.

Does a new MEWP need a thorough examination before first use?

HSE notes the declaration of conformity may substitute for the initial thorough examination if the equipment does not depend on assembly or installation conditions.

Does lifting equipment have to say whether it is designed for people?

Yes. LOLER regulation 7 requires equipment designed for lifting persons to be clearly marked to that effect, and equipment that might be used in error to be marked as not designed for lifting persons.

Independent Thorough Examination Of People-Lifting Equipment

GSB examines MEWPs, personnel hoists and other people-lifting equipment as part of our LOLER thorough examinations. We hire, sell and repair nothing, so the report reflects only the condition of the equipment.

A list of your platforms or hoists and where they work, sent to info@gsbinspections.co.uk, is enough to price the examinations; our aim is 48 hours. Questions about a six-month date or a defect on a report can go to 01782 855481, where you reach one of GSB’s two directors, the owners and both senior engineers. Our examinations follow the code of practice of the Safety Assessment Federation, of which GSB is an associate member.

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm