What Is A LOLER Examination Scheme?

An examination scheme is the alternative to LOLER’s fixed intervals. Instead of every item being thoroughly examined at six or twelve months, a competent person draws up a scheme setting out which parts are examined, how, and how often, to suit the conditions the equipment actually works in. This guide covers what a scheme contains, who can write one, how it changes the intervals, and how it is kept up to date.

If you want lifting equipment examined to the standard intervals or to a scheme you already have, send the equipment list and site address to info@gsbinspections.co.uk and we aim to come back with a quote within 48 hours.

What The LOLER Regulations Say About An Examination Scheme

Regulation 2 of the Lifting Operations and Lifting Equipment Regulations 1998 defines an examination scheme as a suitable scheme drawn up by a competent person for thorough examinations at intervals appropriate for the purpose of regulation 9(3). Regulation 9(3) then gives the employer a choice for equipment exposed to conditions that could cause deterioration leading to danger:

  • at least every six months for equipment that lifts people and for every accessory for lifting;
  • at least every twelve months for other lifting equipment; or
  • in accordance with an examination scheme.

Whichever route is taken, a thorough examination is still required each time exceptional circumstances liable to jeopardise the equipment’s safety have occurred.

What A LOLER Examination Scheme Contains

HSE’s guidance says a scheme should identify the parts of the equipment to be thoroughly examined, the methods of examination and testing, and the intervals for examination, including intervals for testing different parts where that applies. It should also cover any other inspection regime for the equipment.

HSE’s leaflet INDG422 describes a scheme as a detailed schedule of checks, examination techniques and testing requirements drawn up to suit the operating conditions of a specific item. One scheme can cover a number of similar items working under the same conditions, such as a set of similar lifting accessories in one factory.

Who Can Draw Up A LOLER Examination Scheme

Any person with the necessary competence can draw up a scheme. HSE’s leaflet names the user, the owner, the manufacturer or another independent person, provided they have that competence. The person who writes the scheme does not have to be the one who later carries out the thorough examinations under it.

The examinations themselves still need a competent person who, in HSE’s words, is sufficiently independent and impartial to make objective decisions, and who is not the person doing the routine maintenance of the equipment.

Longer Or Shorter Intervals Under An Examination Scheme

A scheme can set intervals that differ from six or twelve months in either direction. HSE’s leaflet is clear that a longer period must be based on a rigorous assessment of the risks. A shorter one may be justified where the equipment works hard or in conditions that speed up wear, for example frequent heavy lifts, corrosive atmospheres or shock loading; those examples are our judgement of typical cases rather than a list in the guidance.

Inspections Between LOLER Thorough Examinations

Regulation 9(3)(b) adds inspections at suitable intervals between thorough examinations, where appropriate. HSE says these are carried out by suitably trained and competent people, often the operator or maintenance staff, at a frequency set by risk assessment and taking account of the manufacturer’s recommendations. They normally include visual and functional checks, and the schedule of inspections should be included in any examination scheme.

Lifting accessories such as chains and slings do not normally need formal inspection between examinations, provided they have proper pre-use checks and their thorough examination at the right interval. A scheme does not replace those checks before use.

Reviewing And Keeping A LOLER Examination Scheme

HSE’s leaflet says a scheme should be reviewed regularly, at each thorough examination and after any event that may alter the risks, and that the duty holder must tell the competent person about incidents that may affect them. A scheme need not be held as a paper document, but a written copy should be available on request, for example to the enforcing authority, and it should be secured from loss or unauthorised modification.

Fixed LOLER Intervals Or An Examination Scheme: Choosing For Your Equipment

For most single items the six and twelve-month intervals are the simpler route: they need no further document and are easy to schedule. A scheme tends to earn its place where there are many similar items in the same conditions, or where equipment’s duty is far from typical, so a single set of intervals would be either too frequent or too relaxed. This is a planning judgement for the duty holder, made with a competent person.

LOLER Examination Scheme Questions

Is a LOLER examination scheme the same as a written scheme of examination?

No. A LOLER examination scheme covers thorough examination of lifting equipment; a written scheme of examination is the document PSSR requires for pressure systems.

Can a scheme set an interval longer than twelve months?

It can set longer intervals than LOLER’s defaults, but HSE says a longer period must be based on a rigorous assessment of the risks.

Does an examination scheme remove the need for pre-use checks?

No. HSE’s leaflet says a scheme does not replace operators’ checks on lifting equipment and accessories before use.

Does the scheme have to be on paper?

No, but a written copy should be producible on request, and the scheme should be protected from loss or unauthorised change.

LOLER Thorough Examinations From GSB, On Fixed Intervals Or To A Scheme

We carry out LOLER thorough examinations of cranes, hoists, forklifts, access platforms and lifting accessories, on the six and twelve-month cycle or to an examination scheme already in place. We examine and report only, with no lifting equipment to sell, hire or repair, and our five engineers cover single items and multi-site registers alike.

Send the equipment list, with any scheme you already hold and the site address, to info@gsbinspections.co.uk; we aim to quote within 48 hours. To talk through a scheme or an interval first, phone 01782 855481; calls go to one of GSB’s two directors, who own the business and are both senior engineers. We hold associate membership of the Safety Assessment Federation (SAFed).

About Us

We’re independent engineering inspection company covering the whole of the UK, trusted by over 500 businesses to keep their LOLER, PUWER, PSSR and LEV inspections on track.

Inspections are all we do. We don’t repair, service or sell equipment, so you get a straight, impartial report every time.

Our inspections are overseen by directors who are Chartered and Incorporated Engineers, and backed by a team that’s quick to quote, easy to reach and keeps things moving from first enquiry to final report. It’s why our customers rate us five stars on Google.

We’re Here to Help

Get a FREE Engineering Inspection quote now…

SAFed Associate Member badge

Associate Member Of The Safety Assessment Federation (SAFed)

As an associate member of the Safety Assessment Federation (SAFed), GSB Inspections demonstrates our commitment to complying with industry competency standards and the code of practice set by SAFed. This affiliation emphasizes our dedication to maintaining the highest levels of professionalism, ensuring your safety and peace of mind.

Recent Posts

What Our Customers Say

  • My first contact was with Gary and he dealt with my query and questions brilliantly. He explained the process, it was easy to sort and it went smoothly. Expected contact... read more

    Mrs B
    December 8, 2023
  • Excellent service & communications

    Gary Jackson
    October 8, 2023
  • Been using GSB for a year, great service keeping all our plant and machinery in certification

    James Plant
    September 8, 2023
  • Service, communication, support and advice has been excellent, Garry has gone out of his way to support our school with issues arisen from council maintenance, he has gone out of... read more

    Miss H Morrey
    July 13, 2023
  • Well what a great service Gary provides, always does a very thorough job, can't recommend enough, we always Gary really great guy.

    Daz Griffiths
    May 19, 2023
  • Inspected transferable winch units with, greatly appreciated, additional guidance covering separate requirements for accompanying D shackles and inspection schedule. Very diligent service and great value.

    Andrew Piekarczyk
    March 19, 2023
  • Excellent service very competent knowledgeable and professional staff Would highly recommend

    Carl Eades
    January 19, 2023
  • Great service. Would highly recommend and will use again.

    Jade Furey
    November 19, 2022
  • Gary has been doing our certifications for the last few years. Very professional and very reliable. A**

    Rob Scanlan
    September 19, 2022
  • Great bloke, reliable, informative, pleasure to deal with.

    Gary Jackson
    September 19, 2022

Get Your FREE Engineering Inspection Quote

No middle person, direct contact, fast turnaround.

Please complete the form below to submit your enquiry and one of our team will get back to you. 

info@gsbinspections.co.uk

Quick Reply

Have any questions?​

01782 855481

Usual working hours

Mon-Fri, 8am until 4pm